SMC differential pressure gauge GD400-2-01
2025/5/23 16:24:35
SMC differential pressure gauge
Imported SMC differential pressure gauge model accuracy detection range GD40-2-01 ± 0.006MPa 0~0.2MPa Features: The pressure difference between the inlet and outlet of compressed air is clear at a glance, suitable for filter maintenance
The main function of GD40-2-01 differential pressure gauge is to display the difference in pressure between the primary and secondary sides, in order to determine the maintenance progress of the system. It is small in size, light in weight, and can be easily installed on bypass systems. Standard parts come with protective covers to avoid accidental collisions. Model/Common Specification Model GD40-2-01 uses fluid, compressed air, high operating pressure of 1.0Mpa, environment and liquid temperature of 5-600C, connecting pipe diameter of 1/8 scale range of 0-0.2Mpa, accuracy of ± 0.006Mpa scale, and diameter of Φ 40. SMC G40-2-01 supplies SMC differential pressure gauge.
SMC differential pressure gauge installation location:
1) Not applicable to corrosive gases.
2) Due to the fact that the window is made of plastic, chemical substances must not be attached,
Such as solvents, carbon tetrachloride, chloroform, acetic acid, aniline cyclohexane
Trichloroethylene, sulfuric acid, lactic acid, nitric acid, etc.
3) Not to be used in places with external vibrations and impacts.
SMC differential pressure gauge installation method:
1) The high (HIGH) and low (LOW) indicated on the back of the differential pressure gauge correspond to the high pressure side
And on the low voltage side. HIGH should be installed on the primary side of the filter; Low should be installed
On the secondary side, but a shut-off valve cannot be used to prevent errors due to opening or closing,
Damaging the differential pressure gauge.
2) The differential pressure gauge should be installed vertically and correctly.
3) The differential pressure gauge should be installed on a stable piping system. Any violent vibration and impact will
Reduce the accuracy of the differential pressure gauge.
4) Only applicable to compressed air systems
